How To Install Wia Driver Windows 7

Z7_3054ICK0KGTE30AQO5O3KA30N0

HP LaserJet 3050, 3052, 3055, 3390 and 3392 All-in-Ones - Install a print driver on a Windows vii computer (32-bit merely) using Windows Vista compatibility mode

Introduction

Windows 7 users can use this document to obtain a driver when basic drivers were non built into the Windows operating system (Bone) or to upgrade from a basic print commuter to enable more advanced features. This certificate applies to HP LaserJet 3050, 3052, 3055, 3390 and 3392 All-in-Ones just.

While these products exercise not have a Windows 7 full solution, you tin can run the HP product software created for the Windows Vista 32-chip operating organization on a Windows 7 PC in compatibility manner to enable total product software functionality.

note:

HP LaserJet 3050, 3052, 3055, 3390 and 3392 All-in-Ones are supported in the Windows 7 32-bit operating system (Os) only and are not supported in the 64-scrap Windows 7 environment. If y'all are using the Windows 7 64-chip OS, use the driver included in the operating system to enable impress/scan software functionality (print only when installed through a network) and and so utilise the Browse and Fax feature in Windows or the product control console to fax. Do NOT install a Universal Print Driver (UPD) because this option is print but and is not recommended for multifunction products (MFPs).

Before y'all begin

The HP LaserJet 3050, 3052, 3055, 3390 and 3392 All-in-Ones have a basic impress/scan-only driver built into the Windows 7 operating organisation (Os).

note:

When you connect the production to the computer, Windows 7 detects the hardware and automatically installs the correct driver. A notification lets you lot know when installation begins and when information technology is complete. You lot do not have to download any software or insert the product CD to enable this basic driver.

This basic driver does not include the same features provided on the product CD or in the total feature solution. Customers demand to upgrade from the basic print driver to a total solution to enable product software functionality. To do this for HP LaserJet 3050, 3052, 3055, 3390 and 3392 All-in-Ones, obtain the full characteristic software for Vista (from either the production CD or online download) and then follow the steps in this document to run the HP software on the Windows seven PC in Windows Vista compatibility mode (32-bit only).

Pace ane: Locate the Windows Vista software

Product CD

If you lot have the product CD for Windows Vista 32-bit, follow these steps:

1. Copy the entire product CD for Windows Vista 32-flake to the hard drive of the Windows vii PC.

Download from www.hp.com

If you do not have the product CD, download the software from www.hp.com/go/support. To do this, follow these steps:

1. Go to www.hp.com/become/support, click Drivers & Software, type your production in the search box, click Search, and then select your product from the results.

2. Select your language from the drop-downwards listing and then select the Windows Vista operating organisation (32-bit but).

3. Under the Software section, locate the HP LaserJet ... Full software Solution and then click Download.

4. Click Salvage, scan to the location where you want to save the .exe file, and then click Salvage.

5. Browse to the location where you saved the .exe file and and so double-click the file to launch the WinZip Self Extractor.

6. Browse to the location where you want to salvage the extracted files, clear the When done unzipping open up: autorun.exe check box and then click Unzip.

   Figure : WinZip Cocky-Extractor

   

Step 2: Run the .exe files on a Windows 7 PC in Windows Vista compatibility mode

note:

Later copying the product CD or downloading the Vista full solution software on a Windows 7 PC, the following software components are extracted:

• Toolbox FX

• Scan Application

• Print Driver

• Send Fax

• Uninstall Utility

• User Guide

• Twain and WIA Scan Drivers

In that location are 4 executable (.exe) files extracted to the Windows 7 PC hard bulldoze that need to be run in compatibility mode for a successful installation on a Windows seven PC. Each of these four files (autorun, hpzsetup, HPZstub, and Setup) need to exist modified kickoff before they can be run in compatibility mode on the Windows vii PC. To modify and run the .exe files on a Windows vii PC in Windows Vista compatibility style, follow these steps:

1. Browse to the location where yous copied the product CD or downloaded the Vista packet and then locate the following 4 executable (.exe) files:

   • Autorun (.exe)

   • Hpzsetup (.exe)

   • Hpzstub (.exe)

   • Setup (.exe)

   note:

   These iv files may not show the file type extensions (.exe) when listed in the Full Software Solution folder.

   Figure : .exe Files listed in the Full Software Solution folder

   

2. Change the .exe files.

   1. Right click the .exe file yous want to modify, select Properties, so click the Compatibility tab.

   2. Select the check box Run in compatibility mode for: and select Windows Vista (Service Pack 2) from the dropdown box.

      Figure : Selecting the compatibility mode

      

   3. Click Use and and so click OK.

   4. Repeat for EACH of the iv .exe files.

3. Afterward the four files are set to run in compatibility mode, double click the autorun.exe file and allow the installation to begin.

4. On the acme of the setup screen, click Install Software and then follow the on-screen prompts to complete the installation.

   annotation:

   Exercise non connect the USB cablevision until prompted to do so during the software installation procedure. If yous are trying to connect on a network, go to

   Figure : Brainstorm Setup screen

   

Source: https://support.hp.com/us-en/document/c02096212

Posted by: conklindeabinder.blogspot.com

Share this post